Bosch Axxis Washer Troubleshooting

3. Washer Is Leaking Water

Stop your washing cycle and disconnect your machine from electricity. Check for draining errors, by making sure that the drainpipe is not clogged or pinched. Run a “Spin/Drain” or “Quickwash” cycle without loading the machine to get rid of any possible blockages or debris. Also, make sure that the drain hose is not pushed more than 6 inches into the drainpipe, as it can block your machine from proper draining.

4. Door Won’t Open

As the door latches into an electric lock, keeping the door locked during the cycle, check your door and the electric lock for any possible damages. Check the control cables (2) between the door latch and the main control board for any loose wiring or damages. As these wires provide power to the solenoid and transmit the signal to the main control board for deciding whether the latch is locked or not, make sure that the cables are undamaged. Reconnect any loose wires and replace the damaged ones.

5. My Machine Fills To The Top. How Should I Drain The Washer?

Remove the drain hose from the standpipe and place it in a large bucket. In this case, simple gravity will make the water empty from the washtub. By starting an additional cycle, there is a possibility that your machine overflows, to avoid this, rely on gravity. Before starting a new cycle, make sure that your drain hose or drain pump is not clogged, or pinched, which can result in unsuccessful draining and overfilling.

Plumber in Santa Monica, CA

Plumbing Service Provider