How to Fix a Clogged Kitchen Sink

3. Try Using a Plunger

If the clogs in your kitchen sink are heavy, try using a heavy duty plunger instead. This will be able to pump in pressure to break the clogging in the pipes. At the same time, you can avoid using chemical products that may toxify the waterways.

4. Seal Secondary Sink Openings

Some kitchen sinks have double outlets. If both of the sinks are clogged, it is better to seal off one temporarily. You can use a wet rag to do this while you plunge the other. By doing this, you are able to gain enough pressure to push the clog out with ease.

5. Try Using a Drain Cleaning Auger

If your regular plunger doesn’t work, perhaps it is time to use a snake. It is a drain cleaning auger that goes out to areas that aren’t possible to reach. Just don’t forget to put a bucket below the sink before unscrewing connectors. This area may contain toxic materials that will hurt your eyes or skin, so you must be careful.

Cleaning augers can be purchased that range from fifteen to fifty feet in length. Perhaps a 25 feet length will be more than enough. When using this type of equipment, make sure to follow instructions that come with the packaging.

6. Try Checking the Air Vents

Air vents plugged over the piping from the roof can sometimes be the cause of your ordeal. So, try to check if the air vent is causing it. Likewise, the slope of the drains are not aligned which can also cause the clogging.

Final Thoughts

Clearing clogs from a kitchen sink have lots of solutions depending on how stuffed it is. You just need a little patience to get the results that you want to achieve.