How To Fix Valve Stem Leak

3. Remove The Tire.

After determining that the valve is bad, it is time to remove and deflate the tire. While it is possible to perform this repair work with the tire attached to the car, it is better to remove it because it will be easier, not to mention that it is safer. Once the tire is removed and deflated, use the valve stem tool in order to unscrew the valve, and then dispose of the old core. Take note that you need to completely deflate the tire before removing the old core, as any pressure inside it can cause the core to shoot out and can potentially cause harm to any part of your body. It is also wise to wear safety glasses.

4. Clean The Valve Stem.

Clean the valve stem using the tapered end of the valve core tool and make sure to keep its opening clean of dirt and debris. If the old core threads show any sign of corrosion, then clean the valve stem’s interior threads with the tap end of the valve core tool. Also, always use a valve stem cap to keep out the dirt, which can cause the problem to begin with. Remove any obstructions from the area around the valve and inside the tire.

5. Install The New Core.

Use the valve stem tool to do this step. Use the same end of the tool you used to remove the old core to install the new one. Tighten by hand but be sure not to over tighten it or it can get damaged and force the new valve to leak. After installation, re-inflate your tire and replace the valve cap.

In just five simple steps, and only minutes of your time, you can successfully fix a valve stem leak. Remember that some tire dealers would try to sell you new tires just because of this small problem, potentially costing you some money. So, it is best to know how to work on this kind of thing.